+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Canadian Focus Community (//www.focuscanada.net/forum/forumdisplay.php?fid=3)
+--- Forum: Focus Talk (//www.focuscanada.net/forum/forumdisplay.php?fid=18)
+--- Thread: Installing Headlights Removing Old Ones? (/showthread.php?tid=14245)
Installing Headlights Removing Old Ones? - FocusTunerzx3 - 07-11-2005
any how toos would be much appreciated just wondering on all the screw locations?
Installing Headlights Removing Old Ones? - Oscar The Grouch - 07-11-2005
FocusTunerzx3,Jul 10 2005, 08:19 PM Wrote:any how toos would be much appreciated just wondering on all the screw locations?
[right][snapback]120899[/snapback][/right]
Its not really hard. All ya gotta do is remove the upper grill, then tackle the bolts on hte headlight (3 bolts or so plus one you have to get via under the front bumper). Oh and don't forget to remove the plugs. :D
Installing Headlights Removing Old Ones? - FocusTunerzx3 - 07-11-2005
its the under the bumper one i hate...trying to crawl under a lowered car = no fun. Thx thou i hope i can get these installed before dark lol.
Installing Headlights Removing Old Ones? - dBlast - 07-11-2005
This how-to is pretty good at explaining how to remove the headlight:
headlight install
Installing Headlights Removing Old Ones? - ZX3TUNING - 07-11-2005
on the new headlights, leave the one under the light behind the bumper off, i do... such a pain in the ass to fiddle with when you have to do work with the front bumper off....
Installing Headlights Removing Old Ones? - FocusTunerzx3 - 07-11-2005
Oh yea dont worry i did i wasnt going to put that damn screw back on such a pain in the ass to take off...instead of jacking up my car i drove up on wooden blocks...Kids dont try that at home. :D
Installing Headlights Removing Old Ones? - Crazirich - 07-12-2005
By leaving the lower screw off (I have considered this my self, but not done) do you get headlight shake as a result?
Installing Headlights Removing Old Ones? - Flofocus - 07-12-2005
Crazirich,Jul 11 2005, 12:39 PM Wrote:By leaving the lower screw off (I have considered this my self, but not done) do you get headlight shake as a result?
[right][snapback]121070[/snapback][/right]
I didn't, but without that screw the 1 light would not "get flush" with the bumper so I put it back and it flows much bettre now.
Installing Headlights Removing Old Ones? - FocusTunerzx3 - 07-12-2005
You talkin about the driver side one right...yea i just banged it in lol and now its there :lol: