FocusCanada Forums
Sooo i got bored - Printable Version

+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Technobabble (//www.focuscanada.net/forum/forumdisplay.php?fid=4)
+--- Forum: Focus on Appearance (//www.focuscanada.net/forum/forumdisplay.php?fid=21)
+--- Thread: Sooo i got bored (/showthread.php?tid=22166)



Sooo i got bored - .2001.focus. - 04-24-2014

I have been slowly trying to clean up under my hood a bit. splash of paint here. wash there. I notice a lot of people with the zetecs put engine covers on. I think its massive or fswerks... idk. ... But I am rocking a spi (until she drops) and i dont think they make them for it, plus i love making stuff myself. So iv been messing around with the idea and went to good old paint to get them out of my head. So ill post them here... not 100% sure why. i guess see what you guys think

picture number 1 is the first i made and it is the basic idea.

picture number 2 is after looking at it i decided it would be better to have the wires sit on the out side of the cover to keep the heat off them (i would just drill holes where the plugs are.

picture number 3 is just and idea to make the top piece a little wider to help hide the coil and the timing belt cover/engine side of the engine mount? I did make it to wide and there was no turning back (im to tired to bother) so it wouldnt be as wide. just enough to help hide some of the ugly wires and such.

[Image: 10253758_10154008306310184_2561991904541...e=53C9CC75]

[Image: 10151917_10154008306535184_6935028554446963934_n.jpg]

[Image: 10250285_10154008306670184_4380948140860759414_n.jpg]


RE: Sooo i got bored - 2000zx3sct - 04-24-2014

Cool , if you need any spi parts Lmk . The motor I have will most likely be going to the scrap yard with the blue shell .


RE: Sooo i got bored - .2001.focus. - 04-25-2014

hmmm if i could figure out exactly what is wrong with my car i would see if you had the part... but as long as she lasts like another 4 months im happy. then its wagon or hatchback time... (i want a wagon gf wants a hb)


RE: Sooo i got bored - drunkinmonkey - 05-01-2014

whats your car doing that makes you think something is wrong?


RE: Sooo i got bored - .2001.focus. - 05-01-2014

Iv started to maybe narrow it down. Changed my spark plugs and the second one in on the left (not sure what cylinder that would be, 2 or 3) and it had oil on it. I also ran a bit of seafoam to help clean up and carbon buildups. And I added some fuel injector cleaner. Took my cai off and cleaned the tb and the maf.

What it was doing is at low rpm under load it would also seem like it was back firering. It would kinda loose power or something for a second then go back to normal. It has kinda stopped until today when I was coming up the centennial access when it did it hard. I was in 3rd phisher rpm (3500) and it hit hard. It was like the engine died bit because it's a standard it got itself going again. I'm not saying it did die it just hit hard like it did.

I did find out I have 2 hair line cracks in the exhause manifold. Also I check the spark plug that had oil on it before and after only 80km on it if not less it has oil on it again.


RE: Sooo i got bored - hardk0re - 05-01-2014

take a look at your coil pack..... more specifically the wires going to it... ensure they are not broken/worn...not the plug wires but the 3 wires connecting it. I know zetecs had huge problems with that , not sure if spi had that issue.


RE: Sooo i got bored - .2001.focus. - 05-01-2014

Thanks I start school tomorrow but will check after. My father told me to replace my fuel pump. Iv been kind of looking into it and maybe someone can help. Are all the early focus fuel pumps the same? From what I can tell they are but would rather be sure before buying one.


RE: Sooo i got bored - drunkinmonkey - 05-02-2014

id almost say the piston rings are fried?


RE: Sooo i got bored - Mystake - 05-02-2014

My focus had cut out a few times too back when the alternator was going out. The ECU wasn't taking Ford updates either and had to be replaced along with the alternator.

It all started with those 3 wires to the coil pack...


RE: Sooo i got bored - .2001.focus. - 05-02-2014

The wires dont look bad. But I'll have to track them back more

Maybe I'll pull out my compression tester and test it. Also the whole reason I made this thread well here is a update


RE: Sooo i got bored - .2001.focus. - 05-02-2014

[Image: 10253884_10154037016980184_7039788660707252347_n.jpg]


Re: Sooo i got bored - .2001.focus. - 05-04-2014

[Image: e5a3u5yq.jpg]

[Image: abe4ehuh.jpg]


RE: Sooo i got bored - 2000zx3sct - 05-04-2014

(05-04-2014, 09:57 AM).2001.focus. Wrote: [Image: e5a3u5yq.jpg]

[Image: abe4ehuh.jpg]

It def cleans up the engine bay nicely . Now I want to make one lol .


RE: Sooo i got bored - zx3kash - 05-04-2014

Did you make the rad deflector?


RE: Sooo i got bored - .2001.focus. - 05-04-2014

If that's the piece above the grill then yes


RE: Sooo i got bored - drunkinmonkey - 05-06-2014

just had to rust it out eh lol


RE: Sooo i got bored - .2001.focus. - 05-06-2014

Yeah. Figured it would flow with the hood. Decided to spray some skulls under the hood but you can tell its been a few years since iv touched a can