Help Wanted - Pls And Tks - Printable Version +- FocusCanada Forums (//www.focuscanada.net/forum) +-- Forum: Technobabble (//www.focuscanada.net/forum/forumdisplay.php?fid=4) +--- Forum: Focus on I.C.E. (//www.focuscanada.net/forum/forumdisplay.php?fid=23) +--- Thread: Help Wanted - Pls And Tks (/showthread.php?tid=2514) |
Help Wanted - Pls And Tks - ZTWsquared - 10-14-2008 I didn't watch the guy install this, so I'm not sure how to remove it ... Pioneer deck mounted inside a Scosche adaptor ... deck shown here with faceplate on and removed ... I can reach the right side from behind ... do I remove the deck from adaptor first, or remove the adaptor and then the deck ... in either case ... how?? Thanks Help Wanted - Pls And Tks - SL8RZZX3 - 10-14-2008 Your deck should have 2 keys that came with it Slide 1 in on each side and they should lock into place This should release the deck from the locking sleeve and you should be albe to pull the deck straight out If you don't have the keys..... the Din kit can be "popped" out by gently prying up the bottom as it is only held in by 2 small clips. Once those bottom clips are free you should have more room for the din kit to drop down a bit and clear the top clips. Now be careful as there could be 4 clips on the top, only if the 2 "cougar" clips were not removed. Help Wanted - Pls And Tks - ZTWsquared - 10-14-2008 SL8RZZX3,Oct 13 2008, 01:25 PM Wrote:Your deck should have 2 keys that came with it Okay - thanks Gord ... looking for keys. Help Wanted - Pls And Tks - konafocuswrc - 10-14-2008 if you don't have pioneer key, come visit my work.. i will give you keys..at no charge.. Help Wanted - Pls And Tks - ZTWsquared - 10-14-2008 konafocuswrc,Oct 13 2008, 02:07 PM Wrote:if you don't have pioneer key, come visit my work..Thanks very much Leo ... I did find the keys and I got the deck out no problem. |