+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Classifieds (//www.focuscanada.net/forum/forumdisplay.php?fid=5)
+--- Forum: Buy Items (//www.focuscanada.net/forum/forumdisplay.php?fid=28)
+--- Thread: Stock Coil (/showthread.php?tid=8670)
Stock Coil - NikiterZTS - 08-02-2006
looking to buy (new or used) coil for my 2002 focus for a good price and really fast
thanks
Stock Coil - scoobasteve - 08-02-2006
are you sure its the coil that failed, it could be the harness going to it. those wires break and cause problems all the time.
Stock Coil - NikiterZTS - 08-02-2006
well i mean i would of notest if one of them is broken when i was about to take the whole thing off....but ur right it could be jsut a wire
Stock Coil - scoobasteve - 08-02-2006
NikiterZTS,Aug 1 2006, 01:00 PM Wrote:well i mean i would of notest if one of them is broken when i was about to take the whole thing off....but ur right it could be jsut a wire
[right][snapback]200223[/snapback][/right]
Nope. It might be hard to notice... a small break inside the wire was enough to render my zx3 undrivable...
I'd test the harness before dropping the $$$ on a new coil.
Stock Coil - Flofocus - 08-02-2006
Check this out
http://www.focuscanada.net/forum/index.php?showtopic=12957
Stock Coil - ZX3_2NV - 08-02-2006
I might have one kicking around if you want to buy mine let me know
Stock Coil - NikiterZTS - 08-02-2006
Flofocus
yep my wire is the one on the right......at the shope they could see that 2 of my cylinders were workin and another 2 were just moving without firing
where should i get my harness fixed?
thanks
Stock Coil - scoobasteve - 08-02-2006
1) Go to ford dealership order new harness
2) Cut off old harness
3) Splice in new ignition harness
4) ???
5) Profit
Stock Coil - Flofocus - 08-02-2006
NikiterZTS,Aug 1 2006, 02:23 PM Wrote:where should i get my harness fixed?
[right][snapback]200244[/snapback][/right]
Do you not read my posts? <_<
^^ what scooba said.
Stock Coil - Flofocus - 08-02-2006
If you do go thre the dealership, expect to cost more than $50.
I say they charge you at the very LEAST, an hour labour for this. Its a 15 minute job.
Stock Coil - scoobasteve - 08-02-2006
Flofocus,Aug 1 2006, 03:21 PM Wrote:If you do go thre the dealership, expect to cost more than $50.
I say they charge you at the very LEAST, an hour labour for this. Its a 15 minute job.
[right][snapback]200271[/snapback][/right]
15 min job if you have 1 arm....