12-06-2006, 03:24 AM
(This post was last modified: 12-06-2006, 03:25 AM by SliverSteeda.)
i basically coppied this:
![[Image: 14420_lg.jpg]](http://www.northerntool.com/images/product/images/14420_lg.jpg)
but i used a 6 tonne jack, built the frame out of 1/8" angle iron and bought the jigs at princess auto. the 2.25 jig was $24 and the roller were $9. it will bend 90 degrees in on bend witout a kink.
![[Image: 14420_lg.jpg]](http://www.northerntool.com/images/product/images/14420_lg.jpg)
but i used a 6 tonne jack, built the frame out of 1/8" angle iron and bought the jigs at princess auto. the 2.25 jig was $24 and the roller were $9. it will bend 90 degrees in on bend witout a kink.
Silver 2000 zx3: Cai w/ K&n X-Stream filter, Steeda Wires (blue), Ngk plugs, Steeda Badges, Carbon taillights, Tint 20/30, blue glow And steeda Springs sirius sat radio, 2.5" Custom mandrel bent catback