[schade]

Front:

Control arm bolts -
Step 1 (inner rear nut, #1): 74 lb-ft
Step 2 (inner rear nut, #1): Tighten an additional 60 degrees
Step 3 (outer rear nut, #2): 89 lb-ft
Step 4 (front bolt, #3): 89 lb-ft
Step 5 (front bolt, #3): Tighten an additional 90 degrees
Step 6 (front bolt, #3): Check front bolt torque is 125-170 ft-lb

Sway bar link - 37 lb-ft
Sway bar clamp bolt -
Step 1: 37 lb-ft
Step 2: 52 lb-ft
Ball joint to steering knuckle - 37 lb-ft
Strut plate to chassis bolts (3) - 18 lb-ft
Strut main nut (1) - 35 lb-ft
Strut to spindle bolt - 66 lb-ft

Rear:

Upper shock nut (sedan, hatch) - 13 lb-ft
Upper shock nut (wagon) - 85 lb-ft
Lower shock bolt - 66 lb-ft
Upper control arm (inner) - 76-85 lb-ft
Upper control arm (outer, cam adjustment bolt) - 55 lb-ft
Spindle/hub retaining bolt - 49 lb-ft
Trailing arm pivot bracket bolts - 85 lb-ft
Lower control arm (inside) - 111 lb-ft
Sway bar end links - 11-15 lb-ft
Sway bar clamps - 35 lb-ft

Steering:

Tie-rod end locknut - 46 lb-ft
Tie-rod balljoint to steering knuckle - 35 lb-ft