[GFXjamie]

for tubing size it all depends on how much air you plan on flowing through vs openings in intercooler and TB size and turbo outlet size.

there is no sense getting 3" if you have a 2.25" intercooler inlet and outlet. same thing for TB no sense running some huge piping to it if the opening is fairly small.

i suggest measuring your ins and outs and mathcing up some piping to it. reduce your turbulence within the system.


as for your turbo not being in yet, holy crap. that is insane after 6 months! id just say f*** it, cancel the order and buy else where direct from internet. nothing should take that long, i dont care if it has gold plated housings with your name engraved. thats stupid

as for the work, you can likely do 90% or more your self. the question is can you swap the motors? the turbo part is pretty straight forward. like injectors are simple, running the charge piping is straight forward, you just need lots of random parts and pieces to put it all together. mounting turbo and running water lines and oil lines are pretty bang on simple aswell. what i found to be the biggest pain was to route piping in tight areas, drill through bumper rebar and run vaccum lines when u dont know where they go LOL

good luck on the rest of it however!