[Zoom]

1. Dupilcolor works fine. My first parts were done in that stuff

2. I then moved to the Krylon fusion paint.

Both work fine, and look great.

Quick steps:

1. sand to the desired texture and wash in warm soapy water.
2. clean with something like acetone or similar to remove any oils transfered from your hands
3. shoot em with some primer and set em out to dry for a good few hours
4. Thin light coats of paint and then shoot em with some clear coat.

For duplicolor make sure you get the GROUND coat that they sell along with the metallic paints.

It is a silvery primer that adds a glitter to whatever top coat you choose.