[darkpuppet]

sorry if this looks like whoring.. I'm going to post everything you can touch with the pro racer package, and if possible, can you boys at steeda pull together the things you can touch with the simple tuner?

I just want to see how the 2 compare... it would be interesting to know if changing parameters in the simple tuner would affect other settings available in pro-racer package, but without the need to know how to change it...

ok, here goes...

very long list, so I'm limiting to the big things:

Accelerator pump
adaptive learning
alternator
axle
coasting fuel shutoff
dashpot
environmental
fuel (cold start enrichment, base fuel tables, cold start leaning, etc)
fuel injector (slopes, voltages, etc)
idle (coast, adders for accessories, warmup, ECT, ACT, etc)
knock sensor (timing retarding, shutoff, etc)
maf (transfer function, failed tables, etc)
manual trans gear ratios
O2 sensors (enable, disable, test)
open/closed loop (warmup, tables, time in loop, throttle position of open loop)
returnless fuel pump (desired pressure, voltage, etc)
rev/speed limiter
shift light
spark (advance/retard on ECT, ACT, closed/openloop, per load/rpm, baseline knock table)
system switches
egr
crank fuel
torque limit.

system switches for everything (PATs, Cooling system, sensors, etc etc etc)

I mean, it's impossible to list it all.. well not impossible, I'd just rather post this today...