Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help - Need Fittings
#1
I need two 1/2" NPT (male) to 3/4 Barb 90 degree fitting. I've searched everywhere, but can't find one. I can find them everywhere in the US but by the time they ship it here two fittings cost me $50-$90 dollars which is a little unreasonable.

Looking for Brass or Aluminum, no steel/plastic as it is threading into an aluminum tank.
Something like this:
[Image: FIT083.jpg]

Any help would be greatly appreciated.
Reply
#2
Give this place a call, they might have them.
http://www.regionalhose.com/
Reply
#3
looks promising...i'll give them a call tomorrow.
Reply
#4
Just go to anywhere that sells Gates or Aeroquip fittings.
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#5
lol Oscar, you must be rich. $150 for 4 aeroquip fittings for my application was a little rich for my blood!
Reply
#6
Sorry man thought you were looking for a hydraulic type. Fairview should be what your looking for.

http://www.fairviewfittings.com/

Also Dixon Bayco might have what you're looking for.

Get me a part number for what your looking for and I'll get pricing from my dealers here.
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#7
Crazy found what I wanted in 10 seconds Tongue
Two of these: 139-12D
and 1 of these: 140-6C

Reply
#8
Working on it.
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#9
you might wanna investigate some irrigation parts supply stores if you can't find it anywhere else. You tried Napa right?
2003 Focus ZX5 Racecar/Perma broke/Storage
2011 Volkswagen Jetta Daily Driver
Reply
#10
Irrigation parts are typically plastic or steel, neither are ideal for automotive use. I tried NAPA/CDN Tire/Home Depot/Rona/Lowes/Specialty Plumbing Stores/Performance Improvements...

If I had boatloads of cash to blow I could spend $200 and get fittings that work, sadly I don't hence why I still drive a 2002 Focus Tongue

Reply
#11
if you want I have a friend who could probably machine these for you I don't know how much he'd charge though nor do I know how fast his turn around time is. i'm assuming they'd be aluminum (billet??)
2003 Focus ZX5 Racecar/Perma broke/Storage
2011 Volkswagen Jetta Daily Driver
Reply
#12
(11-09-2011, 04:32 AM)hardk0re Wrote: Irrigation parts are typically plastic or steel, neither are ideal for automotive use. I tried NAPA/CDN Tire/Home Depot/Rona/Lowes/Specialty Plumbing Stores/Performance Improvements...

If I had boatloads of cash to blow I could spend $200 and get fittings that work, sadly I don't hence why I still drive a 2002 Focus Tongue

Acklands-Grainger sells Fairview fittings products and they have a location in Oshawa; 1129 Wentworth W.
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P

2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway


New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come

* New Zetec crate motor - NFG - thanks Topspeed *
Reply
#13
Tried them before I left work, 2-4 week wait and $22/fitting, at this point I don't mind the $22 a fitting its the 2-4 week wait. I read posts in other forums of guys picking these up for a couple dollars at their local hardware store.

Of course this is in USA where they have a proper supply of products in stores.
Reply
#14
(11-09-2011, 12:55 PM)hardk0re Wrote: Tried them before I left work, 2-4 week wait and $22/fitting, at this point I don't mind the $22 a fitting its the 2-4 week wait. I read posts in other forums of guys picking these up for a couple dollars at their local hardware store.

Of course this is in USA where they have a proper supply of products in stores.

If you can find a place in Niagara Falls that sells what you need I can pick them up for you next time I`m down there - probably Sat the 19th - or you can buy them online and send them to my N.Falls NY address; PM me either way if that helps.
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P

2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway


New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come

* New Zetec crate motor - NFG - thanks Topspeed *
Reply
#15
Dude you shoulda called me!

Let me call my Dad at work today they should have what you need in stock...
2002 pitch black ZX3
__________________
Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels

Classic Painting
Reply
#16
Somehow this damn fitting can't be found easily. I'm going to order one from the great USA, but for now its done with some home fittings from homedepot/lowes.
Also got the VC powdercoated while they were recoating the tank...celphone pics make the colour look weird but its a nice gloss red.

[Image: sctank.jpg]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)