Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
For Sale: Aurasound NS10-513-4A 10" Sub
#1
Great unit...great sound. No longer have a car...
Has to go!
Mount this in a ported box (or a larger sealed box) to the specs of the manufacturer, and you will surely be impressed. This is a sound quality piece...(will perform best in a ported enclosure of about 1.45 cubic feet, with a 3" x 10.5" port.)

Clean, accurate, well performing reproduction of sub-frequencies.
And at a great price!

Visually, you can see some styrofoam stuck to it, and the soft rubber grill face shows a bit of wear, but the cone, surround and overall finish are in perfect shape.

$100 + shipping or meet for pick-up (I'm in Muskoka)
zzwungunzz@gmail.com

Nominal Diameter . . . . . . . . . . . . . . .10 inches (254 mm)
Nominal Impedance (Z) . . . . . . . . . . 4 ohms
Sensitivity, 1W/1m (E) . . . . . . . . . . . 84 dB @ 200 Hz
Power Capacity, RMS (Pe) . . . . . . . . 200 W
Power Capacity, Peak . . . . . . . . . . . 800 W
Frequency Range (-10dB) . . . . . . . . Fo - 4 kHz
Minimum Impedance . . . . . . . . . . . . 5 ohms
Voice Coil Diameter . . . . . . . . . . . . . 51.3 mm
Voice Coil Winding Length (h) . . . . . 12 mm
Voice Coil Number of Layers (n) . . . . 4
Voice Coil Former Material . . . . . . . . Kapton
Voice Coil Wire Composition . . . . . . Copper
Magnetic Material . . . . . . . . . . . . . . Neodymium radial
Stray Flux Shielding . . . . . . . . . . . . . Inherent
Magnetic Gap Depth (He) . . . . . . . . 32 mm
Cone Material . . . . . . . . . . . . . . . . . Cast Aluminum
Surround Material . . . . . . . . . . . . . . Injection molded rubber
Polarity, Outward Motion . . . . . . . . . Positive voltage on (+) terminal
Net Weight . . . . . . . . . . . . . . . . . . . . 4.5 kg
Thiele / Small Parameters
Resonant Frequency (Fo) - Fs . . . . . 29 Hertz
Voice Coil DC Resistance - Re . . . . . 3.04 ohms
Total Q - Qts . . . . . . . . . . . . . . . . . . 0.34
Mechanical Q - Qms . . . . . . . . . . . . 9.4
Electrical Q - Qes . . . . . . . . . . . . . . 0.35
Equivalent Volume of Air - Vas . . . . . 53.6 L
Radiating Piston Area - Sd . . . . . . . . 346 cm
Electrical / Mechanical Parameters
Flux Density x Length - BL . . . . . . . . 12.2 Tesla-meters
Compliance - Cms . . . . . . . . . . . . . . 318 mm/N
Total Mass - Mms . . . . . . . . . . . . . . 95.5 grams

[Image: ha6uzy6e_zps9cc8941c.jpg]

[Image: e5a2y5uv_zpsee6b2129.jpg]

[Image: u6etaqu5_zps67d54008.jpg]
[Image: 160510.png]
[Image: 160577.png]
Reply
#2
Bump...
[Image: 160510.png]
[Image: 160577.png]
Reply
#3
Bump up....
[Image: 160510.png]
[Image: 160577.png]
Reply
#4
$75 takes it...

Can be made to easily fit the SVT sub-box.
[Image: 160510.png]
[Image: 160577.png]
Reply
#5
Bump!
I'm in the K-W area....$50
Come and get it! Smile
[Image: 160510.png]
[Image: 160577.png]
Reply
#6
Bump...........
[Image: 160510.png]
[Image: 160577.png]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)