Hi, Guest
09-01-2015, 01:40 AM
(This post was last modified: 09-01-2015, 01:42 AM by drunkinmonkey.)
you should be able to wire them into the turn signals on your grill.. ones power ones the turn signal and ones ground. I believe the middle wires is the turn signal but not sure.. unplug the coneector and turn your lights on and put the LED wires in the plugs and see what they do .. once you figure that out you can solder the wires to the corresponding correct wires
EDIT: your DRL will be the wire on the harness to the headlight itself you can unplug that wire from the socket and tap your new LED wire to that wire
EDIT: your DRL will be the wire on the harness to the headlight itself you can unplug that wire from the socket and tap your new LED wire to that wire
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Instagram @o_so_slo