Hi, Guest
11-08-2010, 04:49 AM
You need to hook up pcv to s vac source or you will get higher pressure in valve cover. Simple fix can also be catch can on breather. The oil around the plug is probably just the valve cover gasket.
To be save just do a comp test on the motor to make sure everything is solid and your not getting too much blowby which can also push pil out the breather. I had the same issue pcv vented to can. Getting oil out the breather.
To be save just do a comp test on the motor to make sure everything is solid and your not getting too much blowby which can also push pil out the breather. I had the same issue pcv vented to can. Getting oil out the breather.