Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Boost Options
#1
Im kinda of bored and thought it would be nice to let ppl know what is actually out there for turbo and supercharger kits for the Focus. Just some that come fromt he top of my head. Feal free to add more. :)

There are more kits under way as we speak so this list will grow :D

Super Chargers
-------------------

Jackson Racing - http://www.jacksonracing.com/
PowerWorks/Focus Force - http://www.powerworks.net/
Pro Charger - http://www.procharger.com/
Vortech - http://www.vortechsuperchargers.com/

Turbo
-------

Toms - http://www.focus-power.com
Precision - http://www.precisionturbo.net/
Steeda (retuned Precision) - http://www.steeda.com
Pectel - http://www.pectelusa.com/
Gude - http://www.gude.com/
Bell Engineering - http://www.bellengineering.net/
Aerocharger - No site. This kit has been discontinued but there are some kits stills floating around out there.

Some misc sites if you want to do DIY
--------------------------------------------

JGS -http://www.jgstools.com/
Turbo Hoses - http://www.turbohoses.com/
Home Made Turbo - http://www.homemadeturbo.com/
Turbo Si - http://thenew.gamesbbs.com/~turbosi/

Props goto everyone who contribute.
Reply
#2
Theres a Few for for the DIY:
----------------------------------
ATP Turbo - http://www.atpturbo.com/
Misc Fittings - http://www.amstreetrod.com/
Reply
#3
I also sell my full turbo kit in pieces

Manifold

Piping

Tuning

Many people buy the DIY kit i sell that has the

Stainless manifold

All piping , Turbo to IC , IC to TB and the Turbo to air filter

Down pipe

Waste gate down pipe

Large intercooler

This lets the customer do the rest of the kit the way they want to do it , I have this for the ZX2 , ZX3 , SVT

Tom
Reply
#4
There are some turbo compressor maps available here:
http://fordfocus.kicks-ass.net/turbo/maps
Reply
#5
Some resources to piping if doing DIY

ATPturbo.com and turbopiping.com
Reply
#6
I believe Roush Performance (http://www.roushperf.com) is selling a turbo kit now too for the beloved 2.0 zetec ...
~ DECEASED ~
The Z-ed Sled ('03 ZTW)
-Eibech Pro Kit
-17" SVT Euro's
-Tip & Tint for show
-nothing for go...yet!
Reply
#7
What is the maximum hp the stock components can handle? If you add boost - what about clutch, transmission, drive shafts, etc. (I am thinking of a 2000 ZX3 Zetec).
Reply
#8
Depends all on the tuner/tune. Some guys are hitting 300whp on stock parts.
New clutch, fly wheel are recomended. I just go off of what I read.
Reply
#9
1turbofocus,Feb 16 2005, 01:47 PM Wrote:I also sell my full turbo kit in pieces

Manifold

Piping

Tuning

Many people buy the DIY kit i sell that has the

Stainless manifold

All piping , Turbo to IC , IC to TB and the Turbo to air filter

Down pipe

Waste gate down pipe

Large intercooler

This lets the customer do the rest of the kit the way they want to do it , I have this for the ZX2 , ZX3 , SVT

Tom
[right][snapback]86760[/snapback][/right]
how much for the complet
kit?? with tuning?
B&G coilovers, Kamakazi headers,focus sport exhaust, 2.5 custom flex pipe, 18" oz rims, 65mm throtle body,ZX3 tuning custom cams,powerworks SC,spec 3 clutch,clutchnet 11lb flywheel,Eibach swaybar package,fs front lower stress bar,fs rear strees bar,svt big brake kit,quife diff,4.06 gears.(2012 plans FR head, 19lb boost & full engine rebuild) Good bye Escape hello 2012 focusBig Grin
Reply
#10
sweetg....welcome to 2005
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#11
yeah I'd like to know what kind of price I'd be looking at. I want to hit 200- 250 in a daily driver. I was looking at doing a t3 with intercooler. I have a center force clutch and 2.25 magna flow ss cat-back. just wondering what I'd have to change/ add to hit those numbers and how much I'd have to spend to get there. I don't want a whole lot of power, just enough to spank my brothers truck and wipe his stupid smile off his face and get him to shut up about my car being crap because it is a four cyclinder.


I can't wait to see his face when a 4 banger with 200 hp bet his chevy truck with double the hp.
Reply
#12
:lol:
[Image: ncclogo.jpg]
Reply
#13
Tom is actually offering that diy piping/intercooler again for about $1475US. He was posting on FF.
Reply
#14
aldur99,Jul 31 2008, 09:56 AM Wrote:Tom is actually offering that diy piping/intercooler again for about $1475US.  He was posting on FF.
[right][snapback]269665[/snapback][/right]

that's no tuning, injectors , no turbo + shipping...blablalba
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#15
sweetg,Jul 30 2008, 04:31 PM Wrote:
1turbofocus,Feb 16 2005, 01:47 PM Wrote:I also sell my full turbo kit in pieces

Manifold

Piping

Tuning

Many people buy the DIY kit i sell that has the

Stainless manifold

All piping , Turbo to IC , IC to TB and the Turbo to air filter

Down pipe

Waste gate down pipe

Large intercooler

This lets the customer do the rest of the kit the way they want to do it , I have this for the ZX2 , ZX3 , SVT

Tom
[right][snapback]86760[/snapback][/right]
how much for the complet
kit?? with tuning?
[right][snapback]269644[/snapback][/right]
Have you given up on the Powerworks supercharger?

Or do you need more boost?
vintage 2000 malibu blue ZX3 ***SOLD***
2013 performance blue ST

TEAM P.I.T.A.
Reply
#16
Also 1turbofocus isn't around here, last I heard he was retiring...again.

Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)