FocusCanada Forums

Hey guys,

So i just picked up Tony's old SVT ZX5, lots of great parts here, however no motor/trans or interior are left in the car.

Some things up for grabs:

STILL FOR SALE AS OF AUG-9, 2:40PM

SVT fuel pump and tank (for easy swap) : 150$
**price change** Cervini MACH5 hood, painted silver with black center: 300$ (changed to what tony was originally asking)
Shell once its stripped down (clean no rust and undercoated): 250$
stock 00-04 headlights: 40
stock 00-04 tails: 30
stock zx3 00 rear bumper: 80
Euro cup mirrors (driver side is damaged a little): 50
Diamond plate floor mats: 50
interior pieces: 5$ a piece, all pillars plastics from a zx5 are there, let me know if you need any. Painted black
Apex springs on SVT shocks (front) FK 60/40 rear shocks and springs and front fk shocks and springs (one shock is bad) take the load for 250
Stock zx3 charcoal seats front and back: 140 mint
Black stock focus floor mats mint: 40
2 radio bezels, one is dark charcoal and one is the lighter gray both stock: make an offer
Steering column; make an offer
Stock air bags, steering wheel and dash : make an offer

THE FOLLOWING ARE PENDING SALE/SOLD
silver front quarters with cervini vents: 75$ each - SOLD
PS pump SVT: 20$ - SOLD
Steering rack SVT: 50 SOLD
SVT steering wheel: 80$ - pending sale
front subframe: 50$ - SOLD
svt ebrake handle: 50$ pending sale
stock zx3 00 front bumper: 80 SOLD
zx3 stock side skirts: 80 SOLD
focus central UDP (just crank): 20 SOLD
4 power doors, painted silver with tint off SVT MINT : 200$ or 50$ each pending sale
Bdl high flow fuel rail, for zetec. Really nice piece and anodized blue: 100$ pending sale
short throw shifter 00-02: 50 SOLD
front SVT bar: 30 pending
SVT sil plates: 20$ pending
rear SVT bar: 30 pending


Pictures to come this weekend. until then here is one of the hood:



Currently the 2 cars are being ripped apart. My GF's zx3 is getting a lot of parts from the SVT that are not listed. Parts will be available this weekend for the most part as the SVT is getting stripped down to as close a bare shell as possible.

Email me for parts, i dont go on the site enough to deal with the amount of PM's i may be getting.

Email: James@cambridge.medichair.ca
Location: Cambridge Ontario

If i missed anything i will update later. All prices are Best offer as well, if you think its to high, make an offer!

(08-09-2012, 03:09 AM)GFXjamie Wrote: [ -> ]Hey guys,

So i just picked up Tony's old SVT ZX5, lots of great parts here, however no motor/trans or interior are left in the car.

Some things up for grabs:

Cervini MACH5 hood, painted silver with black center: 450$

stock zx3 00 front bumper: 80

zx3 stock side skirts: 80

Dibs on the stock side skirts, might be interested in the hood, and need to know colour and condition of the zx3 front bumper?

email sent.

does it have the sunroof switch ?

EDIT:I'm kinda slow today....
Does it have the SVT audiophile trunk carpet?
I need the floor mat.

list for me
-front subframe
-steering rack
-udp
-fender x2
-PS pump

No audiophile but has stock carpet. Didn't think it was different but not cut out for a sub box.

Also no sunroof switch, was sold prior to me buying

Adding a few things:

Bdl high flow fuel rail, for zetec. Really nice piece and anodized blue: 100$
Stck zx3 charcoal seats front and back: 140 mint
Black stock focus floor matts mint: 40
2 radio bezels, one is dark charcoal and one is the lighter gray both stock: make an offer
Steering column; make an offer
Stock air bags, steering wheel and dash : make an offer


Once again, any questions email me. Other option is shoot me a text 519 841 9577. Don't call Im pretty busy lately

Jamie any chance you know if the steering rack works on a regular Focus, I need one but not sure if the SVT is different?

Slightly. Due to 17" wheels they reduced the lock to lock so they had large enough tolerances. It will work but is recommeneded to have svt pump and rack together.

Brandon so far has both of those items in his cart too

Updated!

Price drop on hood to match tony's original asking price. All items which are spoken for are listed.

Feel free to email or text about any parts, if any deals fall thru it will be posted too!

does rear svt bar = rear sway bar? and how much of a pain is it to put on a focus that doesnt have a sway bar from the factory?

for the rear sway bar, you need to puchase the mounting kit from steeda and a set of endlinks. I can sell the endlinks with the RSB for a coffee additional to the sway bar if you like as i believe they are about 40$ to buy new. It is pretty easy to do once you have all the parts. The cars with stock rear sways, came with the mounting component built right on the subframe. I was in the your boat before too.

Jamie - I hope you don't mind but I had to reorder your list - these old eyes just can't make it out.

STILL FOR SALE AS OF AUG-9, 2:40PM
4 power doors, painted silver with tint off SVT MINT : 200$ or 50$ each
SVT fuel pump and tank (for easy swap) : 150$
**price change** Cervini MACH5 hood, painted silver with black center: 300$ (changed to what tony was originally asking)
SVT sil plates: 20$
Shell once its stripped down (clean no rust and undercoated): 250$
front SVT bar: 30
rear SVT bar: 30
stock 00-04 headlights: 40
stock 00-04 tails: 30
stock zx3 00 rear bumper: 80
short throw shifter 00-02: 50
Euro cup mirrors (driver side is damaged a little): 50
Diamond plate floor matts: 50
Steering rack SVT: 50
interior pieces: 5$ a piece, all pillars plastics from a zx5 are there, let me know if you need any. Painted black
Apex springs on SVT shocks (front) FK 60/40 rear shocks and springs and front fk shocks and springs (one shock is bad) take the load for 250

THE FOLLOWING ARE PENDING SALE
silver front quarters with cervini vents: 75$ each - pending sale
PS pump SVT: 20$ - pending sale
SVT steering wheel: 80$ - pending sale
front subframe: 50$ - pending sale
svt ebrake handle: 50$ pending sale
stock zx3 00 front bumper: 80 pending sale
zx3 stock side skirts: 80 pending sale
focus central UDP (just crank): 20 pending sale

is this what i would need to get Jamie?
http://www.steeda.ca/ford-focus-parts/2..../555-1062/

I think i will take this sway bar along with the end links, my car leans way to much in the turns and i am hoping this will help it out.

Also do you have any pictures of the SVT sil plates? i might take those as well

Any stock SVT Mirrors? or even ZX3 driver side for cheap.

Just the euro cup manual mirrors

bump for picture of the hood!

300$ firm on the hood. Fibre glass Cervini mach5 hood painted satin black in the middle

BUMP!

been doing werk today. Front end is stripped to bare shell, ZX3 is converted to euro and removing rear subframe and components tomorrow.

Lots of stuff available still, Email or text me if interested in anything! list is getting updated as parts are requested and i am able to bring any parts to meet if we have one monday

(08-12-2012, 10:19 AM)GFXjamie Wrote: [ -> ]ZX3 is converted to euro

Better not be a black ZX3 with a mk1.5 Euro front and Euro rear?
Cause there's already one driving around Guelph.

Silver lol its basically tony's car in a 3 doors