+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Canadian Focus Community (//www.focuscanada.net/forum/forumdisplay.php?fid=3)
+--- Forum: Focus Talk (//www.focuscanada.net/forum/forumdisplay.php?fid=18)
+--- Thread: Troubleshooting**updated** (/showthread.php?tid=4386)
Troubleshooting**updated** - girard.k - 11-12-2007
**UPDATED**
well i got the car unlocking arming and locking fine now but im havin some trouble getting the door to read ajar.
I wired it up correctly and it wasn't reading closed(running 12V), so with a test of continuity and checking voltage i found that the door trigger on the driver side is getting about 2.5 volts...so im guessing that the alarm module has to read around 12V to work, so i thought i would just attach a 12V source, but in doing so i can't have 14.5V running so i wanted to relay it, can anyone offer some advice on how to wire a relay... I have a relay with #'s 87, 85, 86, 30... and my 87 is the style where its the pronge in the middle...
Troubleshooting**updated** - Oscar The Grouch - 11-12-2007
FFS. Punctuation. It hurts me eyes reading this.
Troubleshooting**updated** - girard.k - 11-15-2007
^^^BUMP FOR UPDATE^^^