01-28-2010, 10:55 AM
-unclip the shifter/cupholder panel
-remove 2 screws
-remove 2 screws on gauge cluster, remove trim
-unlcip trim panel above glove box
-unclip vent panel
-remove 2 screws
-remove 4 screws holding radio
but there is another way to do..
find wires in rear door seal and test wires for resistance..
or take off door panel and trace speaker wires..
-remove 2 screws
-remove 2 screws on gauge cluster, remove trim
-unlcip trim panel above glove box
-unclip vent panel
-remove 2 screws
-remove 4 screws holding radio
but there is another way to do..
find wires in rear door seal and test wires for resistance..
or take off door panel and trace speaker wires..
BLACKBOX(DASHCAM) | LED | HID | REMOTE STARTER + SECURITY | 12 VOLT ACCESSORIES | CAR ENTERTAINMENT | PERFORMANCE UPGRADE | MAINTENANCE REPAIR
info@motormaniac.ca | 905.508.3737
If you are calling after hours, please leave a pm or detailed voice mail and we will get back to you as soon as possible.
info@motormaniac.ca | 905.508.3737
If you are calling after hours, please leave a pm or detailed voice mail and we will get back to you as soon as possible.