Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dyno Day Has To Be Rescheduled
#1
Quote:Dyno Day Canceled

While completing the final installation of our brand new Mustang Dyno… we ran into a major unforeseen problem.  The concrete base that the 9500lb monster anchors down to turned out to be unsuitable.  The dyno will have to be removed in order to correct the problem.

In a last minute and extremely disappointing decision, we’re forced to cancel our dyno day on Saturday.  We’re all very unhappy with the outcome and were trying desperately to have the problem resolved… in fact, if you called the shop today and found nobody answering it’s because we were frantically seeking every avenue to save the day.

We will be rescheduling the event for sure, and will have a date nailed down as soon as possible.  There will be an additional price break for that day given the cancellation.  We sincerely apologize for any inconvenience this may have caused for your travels.  We are truly disappointed and look forward to making it up to everyone.

Pat Arlia

:( Really really sorry guys, I was SO looking forward to hosting all of you. Hope you understand we'll be up and running asap and rescheduling with a sweet deal.

I'm still going to head up to the shop for the day if anyone is in the neigborhood and wants to stop by.

Carey
2004 SVT 3Dr

STKVSTDA
Reply
#2
Sad to hear. Hope that concrete guy is sucking up the cost of the botched work.
2000 Black ZX3
Blacked Out Head & Tail lights - APC Clear Turn Signals - 20% Tint All Round - K&N Filter - Cheap ass fogs that are brighter than my headlights - Clarion DXZ745MP - Jensen XA 4100 amp on Mobile Authority 200w 6x8's - Jensen 340w amp on a 12" Rockford Sub, custom enclosure - KYB GR2 Dampers - SHM Springs @ 1.5" - Brembo Cross Drilled Rotors w/ CVR Ceramic Pads - Silver Gauge Bezel - Focus Central 2-Piece Under Drive Pullies - 17 x 7 Rims by Fast Wheels mounted on 215/40/17's - Wings West W-Typ front lip - Coming Soon: Paint, Component Speakers (Spring 06)
Reply
#3
wow..that must suck!
Reply
#4
bummer..............next time
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#5
Oh boy... Well at least I won't show up in steelies for it when it's on again.

Plus it gives me some time to get the UDP installed. :lol:
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#6
This really F'n SUX!!!

I will be refunding ppl who made pre-payments....


:( :( :( :(





Reply
#7
Wow, that sucks. I was looking forward to the Dyno Day and hot-lapping, uh I mean cruising in Carey's SVT Focus :D

We might still drop by as we have other arrangements for Friday night and Sunday anyways.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#8
baaaahhh.... :angry:
00 DAKOTA R/T.......I just didnt like the torque of the Focus thats all...!!!
Reply
#9
:(

Ah well, we'll still get to see some numbers from out west.

Plus an additional discount at a later date, maybe I can get in on that. :lol:
[Image: ncclogo.jpg]
Reply
#10
dang, this sucks big time, i even took work off for this event. :angry: oh well, it musta been that contractor that laid the concrete didn't wait 28days for the cure period for the concrete to hold it's shape properly, i guess that's where the rushing the job gets you. sorry to hear pat hope everything works out better the second time around.
Reply
#11
Ah crap :censored2: there goes my plans for this weekend. Guess it can't be helped but I'll organize a flaming torch & pitchfork rally to the home of the dingaling who laid the concrete improperly <_<

What is it about laying concrete that seems to stump so many people? :wtf:

NefCanuck
(This day just keeps getting better and better... I wanna go back to bed and its only 10:30AM)
Reply
#12
NefCanuck,Aug 5 2005, 10:31 AM Wrote:What is it about laying concrete that seems to stump so many people?  :wtf:


Tell me about it... we've put a man on the moon for crying out loud... concrete is not rocket science :rolleyes:

Thanks for your support guys. Please let anyone you know who was planning to attend in case some of them miss this thread.

Carey
2004 SVT 3Dr

STKVSTDA
Reply
#13
BrooksZX3,Aug 5 2005, 11:11 AM Wrote:
NefCanuck,Aug 5 2005, 10:31 AM Wrote:What is it about laying concrete that seems to stump so many people?  :wtf:


Tell me about it... we've put a man on the moon for crying out loud... concrete is not rocket science :rolleyes:

Thanks for your support guys. Please let anyone you know who was planning to attend in case some of them miss this thread.

Carey
[right][snapback]128416[/snapback][/right]

Well it ain't simple either. You have to have the right mix of dry mix powder, gravel (if needed), rebar, water, reinforcing steel, anchors. It ain't easy holding up 10000lbs of equipment and cars pushing lots of HP.

edit: When I told NOS this morning, he didn't believe me. Shoulda bet him $100.00.
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#14
Oscar The Grouch,Aug 5 2005, 11:23 AM Wrote:
BrooksZX3,Aug 5 2005, 11:11 AM Wrote:
NefCanuck,Aug 5 2005, 10:31 AM Wrote:What is it about laying concrete that seems to stump so many people?  :wtf:


Tell me about it... we've put a man on the moon for crying out loud... concrete is not rocket science :rolleyes:

Thanks for your support guys. Please let anyone you know who was planning to attend in case some of them miss this thread.

Carey
[right][snapback]128416[/snapback][/right]

Well it ain't simple either. You have to have the right mix of dry mix powder, gravel (if needed), rebar, water, reinforcing steel, anchors. It ain't easy holding up 10000lbs of equipment and cars pushing lots of HP.

edit: When I told NOS this morning, he didn't believe me. Shoulda bet him $100.00.
[right][snapback]128420[/snapback][/right]

Yes, but I'm sure they didn't hire some yokel whose concrete making experience soley consisted of pouring foundations for backyard patios either :P

The only possible excuse the contractor might have had was if he was restricted from watering the slab properly because of water restrictions. Concrete for optimal strength has to dry slowly, if it dries too fast it can become brittle and be therefore unsuitable. (The joys of a father that was in the construction trade, he knows all the ins and outs and won't stop talking about them either :rolleyes: )

NefCanuck
Reply
#15
well that sucks..........................but i had to cancell anyways so i guess it kinda works out for me.............hopefully we can get it going again soon though!!
Reply
#16
I was actually planning on stopping by ... serves me right.. maybe I will concentrate on my gauges instead.

too bad the rest of august is pretty much booked.
Contribute to focuscanada.net's future!

Donations of $20 and over get a custom title!







Reply
#17
I feel horrible for everyone who was going!
But hopefully next time will be a go.
Reply
#18
Wow, luckily I made one last effort to get to the forums, firefox kept giving me web address could not be found message and I was about to go to bed, if not....well i'd be making a long drive for no reason lol

Sorry to hear about the materials problem, hopefully it will get repaired properly so there are no future events such as this...

Oh and nefcanuck, I know how you feel....my dad owns his own home restoration business so once he gets started talking about process or materials, he just wont stop lol
Reply
#19
So the whole day is a wash then ??

or is there still going to be a mini car show there with those showing up umm randomly ?
I was the only member on this board with a Yellow Focus Sedan, and a 2002+ Euro Facelift on a sedan.
Reply
#20
Hmm...if they rescedule...I should be able to attend, now that I'm back in Canada, and am coming home on the 10th...saweet.. :)
Bleeding Ford Blue again...
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)