Hi, Guest
|
Fuses
|
10-04-2004, 04:26 AM
How do i pull these fuses?
Ive tryed pulling by hand... No Go, I pulled the cap off. Is thier a way that i dont know? Im trying to do the Fog light mod.
10-04-2004, 05:16 AM
Use the little yellow fuse puller, it should be attached to the door on the fuse comparment in the engine bay.
If not, try needle nose, but lightly. 
10-04-2004, 05:19 AM
The foglight mod uses the relays, not fuses. The relays are pretty tough to get out, since the prongs face both ways so you cant really wiggle them out.
10-04-2004, 11:04 AM
Ya I broke the cap off 12 lol, Not sure what to do now.
The cap may "snap" back on, mine did after it snapped off when I tried pulling with vice grips.
It might be easier with a warm engine as the female connector may expand more than the male? When I did finally do it, it was right after a highway run. I had the same problem but eventually got it off with lots of simultaneous pulling, wiggling and cursing.
2001 Focus ZTS 2004 WRX
"I'm just here for the camping" http://www.facebook.com/profile.php?id=687620231 TEAM P.I.T.A. FTW! 
10-04-2004, 02:14 PM
2001 ZTS,Oct 4 2004, 01:18 AM Wrote:It might be easier with a warm engine as the female connector may expand more than the male? When I did finally do it, it was right after a highway run.Warning: Female insert may expand during heated stress :P thats for u perverst out there :rolleyes:
OFFICAL FC BABYSITTER
|
|
« Next Oldest | Next Newest »
|
