Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
08+ dashboard in a 00
#1
Just so some crazy people like me know, the 08+ dashboard fits perfectly, frame heaterbox and all into 2000+ cars with no physical modification. The steering columns are different so I reused my 2000 and welded new studs onto the frame. Wiring on the other hand.... Its a bitch. But its possible. I have the radio, heater controls and display working. I had to use my 2000 cluster cut up a bit to fit though. This cars bus isn't can bus like the 08+, so the cluster won't work.    
Reply
#2
   
   
   
Here are some more complete shots.
Reply
#3
quite interesting indeed, nice job.
Little bit of show, little bit of go.
Reply
#4
hmmm interesting
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
#5
I now need to see if 08+ door panels even come close to fitting my doors. Or maybe make something. Who knows. Solid as a rock, no rattles. Looks awesome too.
Reply
#6
kinda sucks about the gauge cluster not working.
what are you going to do with the pillars?
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
#7
The 08 has pillars that only go to the headliner, which almost snap into place, so I'm going to cut a set of stock 00 ones where the 08s left off to cover up the seam. I only have the passenger side one from the 08. I didn't grab them till one was already gone.

And it does suck about the gauge cluster because the newer ones look way cooler. I'm thinking of using a tablet and an odb2 reader and the torque app as a cluster in the future. Or a custom app. The only thing I'm unsure of is the fuel level.
Reply
#8
Wow nice work
My other ride is your Mom
Reply
#9
Thanks! The worst part about anything used: getting up in the -15 weather and popping the blower motor resistor, while just replacing the one I took out and having them not be the same. Hurricane cold air till the highway, fire air on the highway then back down to mildly warm air driving into work Hahaha. I parked to eat my mcmuffin at work and literally watched the temp gauge creep down. And yes I know my thermostat is good haha.
Reply
#10
Hey your the dude I seen at princess auto lol . Very Nice work , I've always had this thought in my mind and it's good to see it actually done . So you actually got everything to work ? The dash loom plugs into the same spots ? . Much butter than that tan dash .
2002 SVT Focus
Procharger @ 10psi , Clutch Masters Stage 3 Clutch,Stainless Borla Exhaust, Ebc dimpled + slotted rotors and brakes ,Russel Stainless brake lines , Koni adjustable shocks ,Eibach Sportline Springs , CFM short throw shifter , Euro Grill , CFM 65mm tb , Mach Headlights , MSD Coil ,SCT Dyno tune @ steeda , Volant Intake .  
-2003 SVT Wagon - Euro Conversion , currently retired
Svt side skirts , st170 front bumper , mach headlights , spax rear adj shocks , focus sport rear springs , volant CAI , Roof rack delete , Street edition Spoiler , MBRP exhaust , Eibach front swaybar , shorty shifter and lots more to come!                             .
2011 SES - daily driver will be modded soon .                                                                                                                                                        
Reply
#11
Hey man! And the wiring harness from the 08 I had to strip down to the bare heater/radio/display wires that go to the 08 smart junction box, and hook it up as a second separate system. So this is by no means plug and play lol. If Anyone wants to do a swap like this I can give help and all the Mitchell wiring diagrams. I ended up with a harness with power, ground, ignition, accessory and blower motor power wires and two fuse boxes lol
Reply
#12
seen you yesterday at Kenny u-pull. cars looking good man
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
#13
Thanks! Its constantly evolving. I'm going to have to collect all my pics and make a build thread soon. Smile
Reply
#14
I took one yesterday of it when you were there. just the back end of it
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
#15
She's dirty and broken as all hell though. Winter was rough. Still rocking being part of the one car club though haha
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)