Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rust Proofing
#1
Hi All - thought this the best place to ask...should I or shouldn't I do the rustproofing on my new 07 ZX5 GFX? I've only had it a month and a half and want to make a decision before the snow comes (if we get any)..
So how are the focuses with rust - recommendations please?
Reply
#2
I would.

After the Focus, I vowed I would rust proof all my cars from now on. I know a bunch of us have had rust issues won the hatch, door jams and under the skins of the lower doors. Especially the rear doors on 4-door models.

If you're leasing. forget it.

It all depends on how long you want the car.
Reply
#3
Do it, I'll be doing mine this fall.

If you get it done within one year / 20,000KMs, it's warrantied for life with periodic touchups.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#4
Has anyone done the electronic rustproofing that Canadian Tire is selling?
Proud member of the CDan nation.
2000 White ZTS: retired
2012 Frosted Glass SEL: active
K&N Filter.....
Reply
#5
do it....i do it every year.......

they recommend to do it before the winter and after
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#6
I bought the car not leased and i intend on keeping it for my daughter who will be driving in about 5 years...
So do it every year? It's not a one time thing??
And better off doing it at the dealer? Or where is good? (Burlington....)
Reply
#7
thanks for the feedback BTW..
Reply
#8
I got it from Ford dealer ,

Tricare Rust module
Acid rain selant

Every year you need to take the car in to an authorized tricare dealer aka ford to get the acid rain protector inspected to see if its still good! They say it will last about 3 years then needs to be redone . with this package which I highly reccomend you dont have to worry about rust as long as you do the sealer when needed whether that be when inspected or 3 years the car is warrantied against rust for as long as your name is the owner on the title .

I got a deal on mine since my bro in law is finance manager but I think reg price is like $599 might have went down since then though but its worth every penny !
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply
#9
ps I think nikiter means underbody and spray etc ... were talking rust module and aicd ain protectant sealer .
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply
#10
I had my Focus done by Rust Check two years ago and skipped last year. I'm paying for it now... :( I'll be doing it yearly from now on.

I always had my cars Krown-ed before, but now my local mechanic is a Rust Check dealer, which is all the same stuff. Beware of Wal-Mart and small shops that advertise undercoating for cheap. Usually don't do the same level of work, same coverage, the proper areas, etc. We had Wal-Mart do my old Mustang for years, then pull the interior apart to find they had never applied the coating to the inner rear quarter panels, even though the holes had been drilled and plugged. :(

Do it right, do it often! :D (rust proofing that is!)

Ryan
Ryan and the Silver Sedan
++++++++++++++++++++++++
2008 Mazda5 GS/Copper Red Mica/2.3 MZR 5AT/22% Tint
[Image: 49951.png]
2011 Ford F150 FX4 Supercrew/Race Red/3.5 TT EcoBoost
Reply
#11
skipper,Sep 25 2007, 12:09 PM Wrote:I bought the car not leased and i intend on keeping it for my daughter who will be driving in about 5 years...
So do it every year?  It's not a one time thing??
And better off doing it at the dealer? Or where is good? (Burlington....)
[right][snapback]249468[/snapback][/right]
I had my truck rustproofed religously for the past 9 years. Rust issue came up last fall, and I went back to Krown Rust to have them take care of their "warranty issue". Ha. They wouldn't even look at the truck. So I would not recommend them.
You need to get a rustprrofing product that is waxed based and not petroleum based like 99% of the main sellers use.
There is a place hre in Burlington that is a hole in the wall paint shop that I would recommend to have your rustproofing.
Hi Tech Collision. It's in Burlington on Plains Road.
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#12
Always get the car done, it'll save you hassles in the long run (In fact the '88 Chev Celebrity that my dad passed down to me back in '93 and I drove for two more years after that) had been undercoated every year, washed off the gunk and it looked like new underneath :D I was sold)

NefCanuck
Reply
#13
meford4u,Sep 25 2007, 01:45 PM Wrote:
skipper,Sep 25 2007, 12:09 PM Wrote:I bought the car not leased and i intend on keeping it for my daughter who will be driving in about 5 years...
So do it every year?  It's not a one time thing??
And better off doing it at the dealer? Or where is good? (Burlington....)
[right][snapback]249468[/snapback][/right]
I had my truck rustproofed religously for the past 9 years. Rust issue came up last fall, and I went back to Krown Rust to have them take care of their "warranty issue". Ha. They wouldn't even look at the truck. So I would not recommend them.
You need to get a rustprrofing product that is waxed based and not petroleum based like 99% of the main sellers use.
There is a place hre in Burlington that is a hole in the wall paint shop that I would recommend to have your rustproofing.
Hi Tech Collision. It's in Burlington on Plains Road.
[right][snapback]249480[/snapback][/right]

Listen to the man, we've had similar experiences with my fathers BMW. its been 'rustproofed' every year, and about 2 years ago we had some serious rust coming through....

i dont rust proof any of my cars.
[Image: ncclogo.jpg]
Reply
#14
I would say to get it done or go to napa and buy a few cans of diy. stuff . I wouldnt suggest the 599 stuff cause ive seen a few with rust after the dealer stuff and the company still wont waranty it.
[Image: style2,duratec-spc-power.png]
Reply
#15
Get it done man! Im taking mine to Walmart to have it done...$39.95 Non drip.
[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#16
oldeguy,Sep 25 2007, 10:18 AM Wrote:Has anyone done the electronic rustproofing that Canadian Tire is selling?
[right][snapback]249464[/snapback][/right]


Well I wouldnt spend the $200 on one, I salt the highways part-time in the winter and we looked into getting a few but they don't protect 100%
[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#17
The electronic rust proofers don't work.
There is a class action law suit set agaisnt the company that makes them (US)
My inlaws Epica had one from the dealer and he has already had some respraying done due to rust.

I'm an advocate of Krown.
My Focus is 7 years old and looks great.
Krown is NOT oil based like many other products.
If it doesn't drip it doesn't work!

They have a binder in mots of their shop with newspaper articles from the main newspapers you can read that back up their findings.

Cheers
Yellow 2000 ZX3 - Tinted Windows, SVT Air Intake, MBRP Exhaust, NewEdge Performance 2.25" Flex Pipe, Focus Sport UDP, SVT Bumper, Ford Racing 9MM Wires, K&N Filter, XCal2 ECU Upgrade, Shorty Antenna, Ported Throttle Body
190,000 KM (120,000 Miles) and counting!
Reply
#18
Alec Brandon,Sep 26 2007, 07:39 AM Wrote:The electronic rust proofers don't work.
There is a class action law suit set agaisnt the company that makes them (US)
My inlaws Epica had one from the dealer and he has already had some respraying done due to rust.

I'm an advocate of Krown.
My Focus is 7 years old and looks great.
Krown is NOT oil based like many other products.
If it doesn't drip it doesn't work!

They have a binder in mots of their shop with newspaper articles from the main newspapers you can read that back up their findings.

Cheers
[right][snapback]249557[/snapback][/right]
Krown is oil based. They changed the formula 5-6 years ago. The articles in that book I bet are older than that.
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#19
Definately do it.
Reply
#20
electronic does so work , maybe not the cheap can tire ones but the tricare from dealer does , and its warrantied for life . Ive seen cars with it installed with 0 rust and same car same year with none completely rusted . sold me
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Rust Proofing silver02svtf 16 4,763 11-01-2004, 05:47 AM
Last Post: winnipegkevin

Forum Jump:


Users browsing this thread: 1 Guest(s)