[gfxman07]

Hi all
I had a 00 zx3 and had a set of Team Dynamic Racing monza 17 on it ,got them with the car back then right outta the showroom , If any one can tell me what the standard offset is and if there 4 - 100 's or 4-108's and would they fit my new 07 GFX roller ????.please get back to me via email at zx3.guy@sympatico.ca
Thanks in advance
Matt Roosevelt B) B) B) B)

[Focus man. Focus.]

The bolt pattern is the same. I believe the only difference is the diameter of the front brakes. On the earlier modles you can use a 14" wheel and tire combo for snow tires but on the newer version the front brakes will hit the rims if you use that set up. But I think you should be able to make your swap without any issues.

[gfxman07]

Focus man, Focus.,May 1 2007, 12:41 PM Wrote:The bolt pattern is the same.  I believe the only difference is the diameter of the front brakes.  On the earlier modles you can use a 14" wheel and tire combo for snow tires but on the newer version the front brakes will hit the rims if you use that set up.  But I think you should be able to make your swap without any issues.
[right][snapback]236904[/snapback][/right]

Hi
I need the numbers ??? I don't have a clue to which one's they are. LOL
getting there soon and a new set of chromy 18's I hope too .
Thanks in advance ... P.S. the stiffer the pickle the straighter the line .(LOL)
Cheer's
Matt Roosevelt B) B) B) B)

[thenorm]

bolt pattern for all Focus 4x108
stock offset is around +50mm (depending on model)

anything from +42 to +52mm offset should be fine with no rubbing

[gfxman07]

thenorm,May 2 2007, 09:31 PM Wrote:bolt pattern for all Focus    4x108
stock offset is around +50mm (depending on model)

anything from +42 to +52mm offset should be fine with no rubbing
[right][snapback]237107[/snapback][/right]

Thank you so much good fellow focy owner
matt r :D :D :D