Hi, Guest
Old enough to know me limit, yet young enough to exceed it.
Thread Rating:
|
Rick Mercer @ Ford Oakville Plant Video
|
02-07-2007, 12:58 PM
Okay that was cool as I've never seen inside the OAC (Do they even offer tours for mere mortals?)
I liked the bikes though. I had one of those as a kid b/c I can't balance a two wheeled bike to save my life. What was the deal with the electronic sign near the end though? The video wasn't clear enough for me to read it to figure out what it was for :unsure: NefCanuck 
Those electronic signs? There tough for even us to understand. they are to show what the production volumes are for an hour, what equipment and line is down and where it is down, and how many beers you can drink in 1 hour and still do your job.
And I think we are still allowed to bring in guests. But there is no "official" tour.
TEAM PITA Don't settle for a wannabe, only accept the real deal.
One day I will rule the world. For now, I have to settle for this place. 
02-07-2007, 01:09 PM
Thats pretty interesting stuff.
Altho i've gotta say i was expecting to see meford in that video somewhere.
Current
09 F150 SCREW 4X4 XTR Former Show Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp Go Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads
02-07-2007, 01:10 PM
meford4u,Feb 6 2007, 10:06 PM Wrote:Those electronic signs? There tough for even us to understand. they are to show what the production volumes are for an hour, what equipment and line is down and where it is down, and how many beers you can drink in 1 hour and still do your job. Ah, I see.... you are kidding about the last thing you mentioned the sign showed right? :ph34r: Touring a car assembly plant is something I've never done before, sounds interesting... NefCanuck 
02-07-2007, 01:47 PM
NefCanuck,Feb 6 2007, 11:10 PM Wrote:Touring a car assembly plant is something I've never done before, sounds interesting...Did they change the name ... I thought it was OAP (Ontario Assembly Plant) ... looks quite a bit different than when Freestar was there. I've lost track of how many times I've been in plants (usually shooting video) and I still look forward to seeing them ... the last one I did was the Lexus plant in Cambridge - it had the largest stamping machine in the world (one of only 4 IIRC) and they could stamp the entire side of an RX350 in one big bang - awesome. I've got all kinds of video from there - where would be a good idea to put it up?
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P
2003 Focus ZX5 infra-red Track Rat - R*I*P 2003 ZX5 CD Silver Track Rat - retired, but still in the driveway New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come * New Zetec crate motor - NFG - thanks Topspeed * 
02-07-2007, 01:57 PM
The CBC has alot of quality shows on its network and I find Ive been watching more and more of it.
I drive a 2010 Golf that growls at people when it goes over 3000rpm.
02-07-2007, 02:33 PM
ZTWsquared,Feb 6 2007, 10:47 PM Wrote:Was Oakville Assembly Plant, but they changed it a few years ago.NefCanuck,Feb 6 2007, 11:10 PM Wrote:Touring a car assembly plant is something I've never done before, sounds interesting...Did they change the name ... I thought it was OAP (Ontario Assembly Plant) ...
Old enough to know me limit, yet young enough to exceed it.
02-07-2007, 11:20 PM
CanadaSVT,Feb 7 2007, 12:33 AM Wrote:Ahhhh .... missed that. Considering Ford's financials of late it's kind of ironic that the name is the same as the acronym for "On Approved Credit"ZTWsquared,Feb 6 2007, 10:47 PM Wrote:Was Oakville Assembly Plant, but they changed it a few years ago.NefCanuck,Feb 6 2007, 11:10 PM Wrote:Touring a car assembly plant is something I've never done before, sounds interesting...Did they change the name ... I thought it was OAP (Ontario Assembly Plant) ...
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P
2003 Focus ZX5 infra-red Track Rat - R*I*P 2003 ZX5 CD Silver Track Rat - retired, but still in the driveway New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come * New Zetec crate motor - NFG - thanks Topspeed * 
02-07-2007, 11:29 PM
I like the end - "We'll get you free beer, but give me the keys" :lol: :lol:
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"
33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned. Daily driver 2: 2006 Subaru Legacy GT COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune. 
02-07-2007, 11:55 PM
ZTWsquared,Feb 6 2007, 11:47 PM Wrote:I've got all kinds of video from there - where would be a good idea to put it up? photobucket? ![[Image: ncclogo.jpg]](http://img.photobucket.com/albums/v76/Flofocus/ncclogo.jpg)
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Rick Mercer's Rant From This Past Tuesday... | darkpuppet | 1 | 1,143 |
01-23-2009, 09:30 AM Last Post: Oscar The Grouch |
|
| Could Be Good News For Oakville Plant | meford4u | 7 | 2,336 |
05-09-2006, 08:22 AM Last Post: habmann |
|
Users browsing this thread: 1 Guest(s)